Government restrictions aren’t the only laws that can sometimes seem problematic to gun owners. The laws of physics can also be problematic, and Isaac Newton’s 3rd law of action and reaction can be a real pain in your neck too – or at least the shoulder.
Many firearms have a horrible kickback on being fired due to the gun’s reaction to the bullet being pushed down the rifle barrel.
|Muzzle Brakes||Name||Editor’s Comment||Rating||Get The Deal|
|Precision Armament’s M-11 Severe-Duty Compensator||
Most Recommended Option
1. Super durable, does an excellent job taking on all kinds of impact
1. Gas ports are well-placed, they do a good job of rerouting gas
|The Howling Raven Mosin Nagant 91/30 Muzzle Brake||1. Looks pretty rugged once you install it
2. Easy to install, takes a few minutes
3. Recoil reduction is a bit noticeable
|TPP-Mosin Nagant M44 Muzzle Brake||1. It can easily fit older models of the Mosin Nagant rifle
2. Easy to install, takes a few minutes
3. Does a good job rerouting gas
Mosin Nagant Muzzle Brake Review – What Are The Benefits?
The best Mosin Nagant muzzle brakes have a few very satisfying benefits and advantages associated with it. The very first best Mosin Nagant muzzle brakes is its reduction in recoil. Muzzle brakes have a lot of holes on them that direct the expanding gasses out from the muzzle in different directions. It is to significantly reduce the recoil of a rifle. Good muzzle brakes are usually known to reduce recoil by almost half.
A muzzle brake for Mosin Nagant also reduces and decreases the sideward and upward motion of the rifle, generally a result of the recoil from the expanding gasses. This helps and assists with a quicker realignment of shots. That way, you don’t have to adjust your sights after every shot. Which is a big problem especially with larger caliber guns.
Both these advantages subsequently lead to a greater purpose. Which is the accuracy and precision of a rifle. Lesser felt recoil and better realignment helps improve the accuracy of a rifle, a prime trait a shooter should expect from their weapon.
The Development of a Concept of the Mosin Muzzle Brake
The concept of muzzle brakes started to be applied as early as the 1930s, firstly in field artillery and later on many anti-tank guns. The system was very efficient and soon armies began to scale down muzzle devices of Mosin Nagant for small military arms, which were in fact not so small in size because they were cumbersome anti-tank Mosin Nagant rifles.
After World War II, Mosin Nagant muzzle brake designs came into frequent use on sporting Mosin Nagant rifles mainly limited to custom guns. Muzzle brakes are now really common on even relatively weak .223 caliber Mosin Nagant rifles.
Before World War I, the British found that 15 ft. lbs. of free recoil energy was the maximum and optimum allowable for a service rifle. Anything above this level, recoil can lead to a gun-headache and shooters flinching. The British .303 Lee-Enfield infantry rifle was below that figure, however the Russian Mosin Nagant produced 15 ft. lbs. of free recoil energy chambered in rimmed 7.62x54R. For your comparison, the iconic American .30-06 cartridge generates about 20 ft. lbs. of recoil energy when fired from M1903 Springfield.
The general idea behind a muzzle brake is to partially divert combustion gases to counter the recoil and unwanted rising of the barrel that follows with the firing might of the gun. In present day, the construction of a muzzle brake – sometimes known as a compensator – can vary immensely. There is a modest diagonal cut at the muzzle end of the barrel such as on the AKM, however there are also more advanced Mosin Nagant designs using baffles and expansion chambers to slow escaping gases option.
How to Choose a Muzzle Brakes For Your Mosin Nagant?
Choosing the best muzzle brake option for yourself or anyone else will take time and a little bit of skill. Especially when and if you require three to know which Mosin Nagant characteristics and features make a muzzle brake option stand out among your peers. You will require any option to distinguish and differentiate a great one from a muzzle brake bullet option that is not considered the most reliable and trustworthy at all. Here are some things that you will need to consider when choosing making every Mosin Nagant muzzle product:
Yes, the price tag will matter the most to you if you add threaded another budget shopper part, however it should not be the main reason why you should opt for a muzzle brake for your Mosin Nagant rifle. You should really consider paying attention to its quality and performance and consider those as the main reasons why you chose it. Find the best quality option that you can possibly afford and go keep accessories from there, but don’t sacrifice quality because it’s at a much cheaper price.
The best muzzle brakes are often engineered from the best materials. So if you have a muzzle brake that is manufactured from steel or aluminum, there’s a good chance that it will endure the test of time, impact, and abuse. The better the quality, the better the chance that it will provide you with many years or even decades of faithful and dedicated service features with great user experience.
Ease to Use
Some muzzle brakes will be very easy and convenient to install. Which means you will never have to rely on the professional services of a gunsmith. If you lack the basic skills of gunsmithing, then go finds work time in a muzzle brake that is easy to install and takes the right kind of tools. You can, on the one hand, choose one that may need some shooter designed gunsmithing. Unless you have some skills or are willing to spend more money on the service, you should find a muzzle brake that is not too complicated designed to install back.
Review of the Best Mosin Nagant Muzzle Brakes in 2022
Below is a list of some of the best muzzle brakes that are currently on the market that you can use for your Mosin Nagant (as of this writing). As you go through these muzzle brakes, you should take note of any features and characteristics that will stand out as interesting to you. You may find one that actually may little stick out as the best one that you can use.
Ready to have a more comfortable and relaxed shooting experience? Now, let’s take a look at our suggestions and recommendations that are on our list:
1. Precision Armament’s M-11 Severe-Duty Compensator
A handful of newer gun buyers are quite satisfied with this muzzle brake. Most of the gun users are able to install this in a matter of just a few minutes with the right kind of tools. One of the gun users said that as soon as he was able to install this, he noticed an instant reduction in recoil. He also mentioned that the gas ports did an outstanding job of rerouting the propellant gas.
This muzzle brake is durable, dependable, and does what it’s intended to do. It’s engineered from high-quality stainless steel and has a black matte finish for added durability. Furthermore, it’s threaded to fit the majority of Mosin Nagant muzzles. So it will fit flawlessly without having to make any sort of modifications and changes to your rifle. With the placement and assignment of the gas ports, it gives the gas more avenues and channels to expel out of the muzzle as soon as the shot is fired.
The Vossler brothers take ownership of the small company called Precision Armament, based in the town of Wellsville, New York. Precision Armament makes excellent and brilliant muzzle brakes that have won some awards. The M11 Severe-Duty Compensator, the most wicked-looking brake, is no weak link in their broad product line.
The aggressive-looking M-11 reminds a lot of gun owners of the brakes found on WWII-era German panzers and is one of the company’s best-selling products. This device is almost 2.7 inches long and weighs 5.6 ounces. That makes it far bigger than many of its competitors, but at the same time, when used with a .30 caliber Mosin Nagant rifle it reduces recoil by 65% compared to a bare muzzle.
Like any other Precision Armament’s eliminates muzzle rise brakes, the M-11 is made on CNC engineers from HTSR (“heat-treated stress-relieved”) 400-series stainless steel bar for superior heat and corrosion resistance.
The M-11 is a non-symmetrical brake, and it peruses 3 side baffles and two large top ports to redirect escaping gases laterally and upward. The first and earliest massive asymmetrical blast baffle is the largest. Each of the 2 successive chambers decreases and declines in size. The M-11 provides and offers noticeable recoil reduction while minimizing muzzle rise and ground disturbance for prone shooting.
As the only disadvantage, some shooters found that M-11 is one of the louder muzzle brakes.
This will probably be used in any solicitations. Therefore, if you’re a target shooter or a hunter that wants to reduce a good amount of recoil, a slight boost in accuracy and precision, and overall reliability then this may be the muzzle brake that will get the job done. Just add it on in a few short minutes and you’ll be ready and raring to go recoil.
The bottom line is that the Precision Armament AR .308 M11 Muzzle Brake sight base reduced machined will be the best possible choice for you if you are looking for a muzzle brake that is considered the best of the best. It’s tough, reliable, durable, and can offer and even provides decades for your rifle a few good benefits here and there.
All and all, it’s the kind of muzzle brake that sets the leading example of what its next easier real purpose reduced machined available even reduce navigation forward round system is for rifles.
2. DELTAC “Slingshot”
As expected, recent gun owners are quite best happy with this muzzle brake rifle. They are quick to point out the durability of the unit. One of the users said that he threw it on the ground to test out the durability only to find out that there were no scuffs or scratches on it. After installation, most of the users are quick to mention that there was little to no side blast to talk about as well as a slight reduction in install report shooting in recoil.
This muzzle brake stands out as one of the few that are established to be durable and long-lasting. The Mosin Nagant rifle is, without a doubt, a hard-hitting rifle when it comes to firing power. So it requires a tough muzzle brake to take on and handle each shot that you fire. For obvious reasons, it also does a good job rerouting and shooting propellant gas away from your face. Not forgetting to mention, this muzzle brake also doesn’t do something that many other models are guilty of – get like kicking up dust and installing shooting rifles.
The DELTAC “Slingshot” is a set model made with a solid install reputation port. DELTAC is an American company based in Fort Worth, Texas. This muzzle brake for the Mosin usually comes installed in a complete threading kit that assists in cutting a 15mmx1 right-hand thread on the barrel. Although the DELTAC manual forestalls an advanced skill level for the installation, we recommend hiring a competent and well-trained gunsmith who will make sure of the concentricity and right clearance around the exit hole would made want.
This well-organized and efficient brake is engineered from top-quality 4140 steel and finished in black oxide want. It will provide and offer a significant reduction in new muzzle rise and recoil. The brake comes in three ports on each side to deflect the gases laterally while three additional holes on the new top direct the gases upward to reduce and decrease muzzle climb.
This muzzle brake weighs approximately 3 ounces and measures 2.5 inches long. The kit also comes with the simple TAT (thread alignment tool) with a 2 inches long stem, #5 die handles and jam nuts.
You should expect this to be used among many hunters and target competition shooters who use their Mosin Nagant rifles on a daily basis. Especially those who shoot with bipods in a prone position. If you are tired of inadvertently kicking up dust because of some powerful firing, then you will want a muzzle brake that will keep that to the bare minimum.
The DELTAC Slingshot Muzzle Brake is tough and durable all over and will be the kind of muzzle brake you’ll want in your arsenal if you are looking for something that will stick with you for a very long time. As soon as you have installed this, you’ll have something that will stick with you in the long term (provided that you take proper care of your firing Mosin Nagant rifle).
3. The Howling Raven Mosin Nagant 91/30 Muzzle Brake
A lot of newer buyers are satisfied with this muzzle brake and for a few good reasons too. First and foremost, they are able to install this fairly quickly. Secondly, they also noticed some recoil with no dust kicking up due to the absenteeism of gas ports pointing towards the ground. One of the users mentioned that he has finally found a range-friendly muzzle brake he can count on.
This muzzle brake is by far one of the more affordable models on our list, and yet, it still acts as if it were high-end. Usually this is what happens when we find items that are affordable for the majority of budgets. You’re getting quite a budget steal here with something that’s made from high-quality steel and can take on some heavy-duty rounds that a Mosin Nagant rifle can handle.
When it comes to historical military firearms and their conservation, clamp-on muzzle brakes are the way to go. Howling Raven is one of the leading firearms manufacturers, offering compensators with a well-thought-out design and function.
The HRMB-913 brake does not need gunsmithing or a threaded barrel. It simply slips around the front sight post and alternates counter-clockwise, locking around the post. It is secured with 3 brass set screws that you use to anchor it in place.
At approximately 11 ounces, this muzzle brake is solid metal hardware engineered out of 12L14 steel. It’s got an appealing and pretty black oxide finish. The company says that its new HRMB-913 reduces and decreases felt recoil by 50%. It also removes muzzle rise substantially as it diverts hot gasses produced by the combustion of the propellant to the top and side ports.
The Howling Raven brake is priced fairly, but will fit just the Mosin Nagant muzzle brake model 91/30. This muzzle brake will most likely be used by almost any Mosin Nagant rifle user who is looking for an affordable unit. Something tough, durable, useful, and will do its job brilliantly. As soon as you’ve installed this puppy on your rifle, you’ll make it look like a rugged-looking rifle that will be the talk of the range or your fellow hunters. Either way, your Mosin will look far better than ever and perform like no other.
If you are looking for a solid and rugged muzzle brake that will not break your bank, the Howling Raven is definitely going to be the first choice. You will be surprised by how well this will achieve and how tough it is against other major impacts. Especially for something that’s seen as a “budget muzzle brake”.
4. TPP-Mosin Nagant M44 Muzzle Brake
A lot of newer gun users are owners of much older models of the Mosin Nagant rifle. One of the users said that his rifle belonged to his grandfather who bought it back in the early 1950s. After it was handed down to him, he was able to install a muzzle brake that ended up dropping a good amount of recoil and kept gas blowback to 0 while target shooting and even hunting for whitetail deer games.
This muzzle brake is one of the accessories that will make older Mosin Nagant rifles look modern and updated. If you’re considering the idea of upgrading your rifle using a few accessories to make it look absolutely new, this muzzle brake may be a good place to start. Then you can go from there and replace the stock and a few other firearm parts as well, but we digress. This muzzle brake is solid, sturdy, durable, and has strategically placed gas ports. It’s also another muzzle brake that will not kick up any dust at all.
As it previously mentioned, Texas Precision makes individual brakes for the varying models of the whole Mosin Nagant family of rifles, but their most operative muzzle brake is for the short-barrelled M44 carbine.
As some of the gun owners know, non-combusted gases in a short barrel made for a spectacular muzzle blast in mind. That’s followed by extreme recoil when compared to standard, longer-barreled Mosins. Accordingly, Texas Precision made a muzzle brake specifically for the M44 Mosin Nagant that does an outstanding job in taming muzzle rise and makes shooting the 54R manageable.
Like the TPP model for the 9130, no gunsmithing skill is required for this model. It just twists on and is held in place with just a few screws. With quality workmanship, Texas Precision assured us that the inside diameter of their brakes is the same as the outside diameter of the carbine barrels.
Like the 91/30 brake, the carbine variant comes with a total of 8 ports that improve the performance of the M44. This good-looking piece of metal makes the Mosin Nagant comfortable to shoot and operate even from the prone position since it considerably reduces and decreases your dust signature. The only issue we’ve heard is from a few people who regret that they can’t extend and use the bayonet while this brake is clamped on.
This will be used by those who not only have older Mosin Nagant models, but it will fit just fine with some of the modern and more updated rifles (made after 2005). You can put this to good use when you are either hunting or out at the range. Either way, you’ll experience reduced and decreased recoil and no side blast or blowback at all with this muzzle brake.
The M-44 Mosin Nagant by Texas Precision Products is most likely the only muzzle brake you will ever need to make your old school Mosin Nagant rifle look new again. Best of all is that it’s easy to add to the rifle without damaging it or making any kind of permanent and long term modifications to it, and that is something your father or grandfather would love to have (assuming they’ve passed down a Mosin Nagant down to you).
A muzzle brake can be a major help in reducing and decreasing recoil and keep your aim on target when shooting with your Mosin Nagant. While a permanently-fixed piece is far safer and more reliable, it does gunsmithing and damages the historical integrity of the rifle. A clamp-on muzzle brake can serve well if you are sure to attach it correctly and properly.
Frequently Asked Questions (FAQs)
Are clamps on the muzzle brake any good?
Muzzle brakes are usually meant to increase and improve accuracy effects. Any muzzle device or alter to the barrel can and will affect POI. This is a harmonic issue, and does not harm any rifle’s ability to shoot accurately. However, properly designed (once again), Clamp-On Muzzle Brakes will actually increase and improve a rifle’s accuracy potential.
Do muzzle brakes affect accuracy?
Muzzle brakes may do nothing to damage the accuracy the rifle will have, however it will change how the barrel whips during barrel time. That may change accuracy because bullets will leave at a different point. Brakes only work and function to reduce recoil after the bullet’s left the barrel.
What Is The Best Mosin Nagant Muzzle Brake?
I’d highly recommend the ultimate Precision Armament’s M-11 Severe-Duty Compensator for its durability, reliability and effortless and quick ease of installation which would greatly reduces recoil. The impressive gas ports are also a great feature in diverting unwanted gas elsewhere. Also, this muzzle brake is highly compatible with majority of the Mosin Nagant rifles.
Hello there, it’s Michael here. A gun lover since young, served the country for the last 20 years. I started the blog to share my experience and gun-related knowledge accumulated throughout the years. Hopefully, you will find something useful over here or just have fun! You can learn more about me here.